Installation dc
Assemble M12 Plug
The scope of delivery includes an M12 cable round connector (TE T4112002081-000) with screw terminals. This is to be connected to a 12V power supply.
Please connect V- / V+ cables to Pin 1 and Pin 2. Use a screw driver #0 or #00 for this.
Pin | Signal | Purpose | |
---|---|---|---|
1 2 3 4 5 6 7 8 |
V- V+ |
0V DC (-) 5-12V DC (+) |
Connect M12 Plug
The M12 connectors have a coding notch (A Coding).
Important:
Check the pins before plugging in
Rotate the plug so that the notch matches the pin in the socket
Carefully insert the plug by hand
Gently tighten knurled screw by hand
Plug in the M12 connector onto the M12 socket on the right side of your TCR. Tighten the ring by hand.
Mount MT80
Carefully tighten the MT80-15 holder with the supplied screws. Use a 25 HEX screw driver for that.
Warning: Using longer screws could crack the enclosure.
Installing the Counter
If you mount the counter to a pole or mast use pipe clamps or metal straps of suitable length to secure MT80-15 bracket.