Skip to content

Installation sol

M12 Solar Adapter Plug

The M12 connectors have a coding notch (A Coding).

Check Notch

Important:

  • Check the pins before plugging in

  • Rotate the plug so that the notch matches the pin in the socket

  • Carefully insert the plug by hand

  • Gently tighten knurled screw by hand

Plug the MP12SOL adapter onto the M12 socket and tighten the ring by hand.

Mount M12SOL

Mount MT80

Mount MT80

Carefully tighten the MT80-15 holder with the supplied screws. Use a 25 HEX screw driver for that.

Warning: Using longer screws could crack the enclosure.

Extend the Solar Cable

Mount TCR

Use the SOL-EXT4 extension cable if you mount the solar panel more then 20cm away from the counter.

Installing the Counter

Mount TCR

If you mount the counter to a pole or mast use pipe clamps or metal straps of suitable length to secure MT80-15 bracket.

Installing the Solarpanel

Mount SOLKIT

Mount the solar panel in a place where it gets enough sunlight during the day. Use pipe clamps or metal straps of suitable length to secure the bracket to the pole.

Adjust to pole diameter

SOLMT with adjustement

Adjust SOLMT bracket to match your pole diameter.

Adjust azimuth

SOLMT azimuth adjustment

You can change the angle of the solar panel to harvest more solar energy. Or you can fix the panel in a vertical position so that no snow or dust can remain on it.